How to choose the right paint brush and roller
If you want to get a great paint finish, you need to start with the right tools. In other words, you need to have the right brush and roller. Here’s how to choose the best brush and roller for your paint job.
Table of Contents
Step 1: Choose quality
First rule is to choose high quality accessories. Better quality translates to better results, and less work for you. Higher quality accessories can hold more paint, deliver a smoother application and reduce splattering.
Step 2: Size is important
There are a variety of sizes available. So think about the size of the job because using the wrong one will be a slow and messy process.
Paintbrushes come in sizes 12mm to 100mm and all have different purposes.
- 12-25mm: for small jobs and touch-up work such as chairs and timber trim
- 38mm: suitable for furniture, small panels, window frames, trellis, moldings, shutters and downpipes
- 50mm: for small to medium size work such as doors, screens, tabletops, railings and cabinets
- 63mm: handy size for outdoor furniture, cupboards, gutters, eaves and doors
- 75mm: for medium to large areas such as fence posts and rails, floorboards, steps, skirtings and fascia’s
- 100mm: for all large areas such as walls, floors, ceilings, roofs and fences
There are also brushes designed for specific jobs like cutter brushes, which are ideal for cutting in for feature walls, and door and window frames. The tapered-edged tip makes accurate painting easy and a longer handle can help control the stroke and precision of the paint.
Step 3: Choosing a brush
A key point to think about is the paint you’ll be using. Oil-based paints, primers and varnishes are best with a solid, medium-length bristle brush. With Acrylic paints, you should choose a long bristle brush, ideally with a synthetic bristle as they will give a smoother finish.
If you’re staining rough sawn timber, use a short bristle brush. This works best for making sure the stain gets in all the cracks.
Step 4: Choosing a roller
When you’re painting a large surface, rollers can make light and quick work. Consideration should be given to the surface and finish required when selecting a roller. Generally, the best rule to apply to most painting jobs is glossier paints and smoother surfaces demand a shorter pile.
Rollers come in 3 different sizes. A short roller is generally 5-8mm thick and is best with glossy paint. It doesn’t hold as much paint but it delivers a smoother finish. A medium or all-purpose roller is 8-12mm thick. It can be used with any paint and produces a soft clean finish on smooth and semi-smooth surfaces. Medium rollers are most suitable for water-based paints on surfaces such as walls and ceilings.
On the other hand, large rollers are 20-32mm thick. They are best used on semi-rough to rough surfaces such as brickwork or masonry. Large rollers have exceptional paint holding capacity ideal for working into damaged or textured surfaces to ensure you get good coverage. The general rule is that the greater the irregularities, the longer the pile you need.
The thickness, the material used and the quality of the roller should be taken into consideration when choosing a roller. Roller sleeves are available in a range of materials. Furthermore, different materials should be used with different paints and on different surfaces.
- Woven Polyester: suitable for use with ALL paints including full gloss enamels
- Knitted Polyester: more suitable for use with water-based paints on smooth and semi-smooth surfaces such as wallboards and cement render
- Lambswool: generally used on rougher surfaces such as cement render and brickwork because of the longer pile height
- Mohair: used with full and semi-gloss enamels on smooth surfaces, ideal for applying polyurethanes, epoxy resins and fiberglass coatings
- Foam: for use with full and semi-gloss enamels on smaller areas such as kitchen cupboards where a mirror finish is required
- Micro Fibre: used with most water-based paints and the short pile is suited for use with acrylic enamel paints
- Textured: coarse, medium, fine covers for textured coats
Romiter Machinery Co., Ltd. is a market-leading designer and a manufacturer of brush machinery. we focused on researching and designing the machinery for different types of brush manufacture solutions. Now, Our factory can provide wooden paint brush handle forming machine, automatic wooden brush ferrule nailing machine, Wooden Brush Handle Round Forming Machine, Wooden Paint Brush Handle Surface Shaving Machine, Wooden Brush Handle Hole Drilling Machine, Paint Brush Wooden Handle Sanding Machine, Brush Bristle Mixing Machine, Brush Ferrule Bristle Filling Machine, cosmetic wooden brush handle machine, Paint Roller Frame Handle Making Machine, Paint Roller Brush Making Machine, Paint Roller Frame Cage Assembling Machine, paint roller frame handle assembling machine, toothbrush making machine and brush metal ferrule making machine.
Romiter Brush Processing Machine meets Europe Quality Requirement. with CE Certification
Welcome to contact us for more information.